Internet - Siemens Gigaset SX682 WiMAX User Manual

Internet

Internet
Status > Internet
The connection settings for your Gigaset SX682 WiMAX are displayed in the Internet
submenu.
Connection status
IP address
Subnet mask
MAC address
Default gateway
DHCP server
Preferred DNS server
Alternate DNS server
Address Translation
(NAT)
ì
If necessary, click on the Refresh button to refresh the data in the status display.
34
The status of the radio connection with the WiMAX network
is displayed as follows:
u
connected = The Gigaset SX682 WiMAX has estab-
lished a radio connection with a WiMAX network. You
will see the connection duration in brackets and in the
format ddd:hh:mm:ss (d=days, h=hours, m=minutes,
s=seconds).
u
disconnected = The Gigaset SX682 WiMAX is trying to
establish a connection with a WiMAX network.
For an existing Internet connection only:
Displays the public IP address and subnet mask via which
your Gigaset SX682 WiMAX establishes the connection
with the Internet.
For an existing Internet connection only:
The MAC address uniquely identifies a network component
within a network, in this case the public MAC address of
your Gigaset SX682 WiMAX within the WiMAX network you
use.
For an existing Internet connection only:
Displays the gateway the Gigaset SX682 WiMAX uses for
connecting to the Internet.
IP address of the DHCP server with which the Gigaset SX682
WiMAX is connected. While the Gigaset SX682 WiMAX has
not been assigned an IP address by the WiMAX network,
the field stays empty.
For an existing Internet connection only:
Displays the domain name server the Gigaset SX682
WiMAX uses to convert names to IP addresses.
Displays whether NAT mode is activated on your Gigaset
SX682 WiMAX. NAT converts the internal IP addresses of
the PCs in your network to public IP addresses. This main-
tains the confidentiality of your internal IP addresses.