Advertisement
Quick Links
Universal Sunshade Mount Kit
Serial Number 400000000 and After Groundsmaster
Series Traction Unit
Model No. 136-1830
This product contains a chemical or chemicals known to the State of California
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Left ROPS-mounting bracket
Right ROPS-mounting bracket
U-bolt (3-1/2 x 5 inches)
U-bolt (4-1/2 x 3 inches)
Bolt (3/4 x 4 inches)
Locknut (3/4 inch)
Washer
© 2017—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Proposition 65 Warning
to cause cancer, birth defects, or reproductive harm.
Register at www.Toro.com.
WARNING
CALIFORNIA
Qty.
1
1
4
4
Install the mounting bracket.
2
2
4
Form No. 3415-648 Rev A
®
4500 or 4700
Installation Instructions
Use
Original Instructions (EN)
All Rights Reserved *3415-648* A
Printed in the USA
Advertisement
Related Manuals for Toro 136-1830
Summary of Contents for Toro 136-1830
- Page 1 Universal Sunshade Mount Kit Serial Number 400000000 and After Groundsmaster ® 4500 or 4700 Series Traction Unit Model No. 136-1830 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm.
- Page 2 Installing the Mounting Bracket 1. Park the machine on a level surface, engage the parking brake, shut off the engine, and remove the key. 2. Use the 8 flange nuts (3/8 inch) from the sunshade kit and the 4 U-bolts (3-1/2 x 5 inches) to loosely install the brace brackets to the roll bar (Figure g213729...