Table of Contents
Advertisement
Facility names and functions B
B6
B7
B8
B1
Shoulder belt hook
Attachment for separately sold shoulder belt.
B2
Viewfinder connector
Connector for viewfinder cable.
B3
MON/RET output connector (BNC)
HD-SDI signal output for monitor (75).
The same character signal as the viewfinder
is superimposed on the video signal to allow
checking the setting menu from the monitor
screen.
B4
REMOTE connector (4 pin)
Connector for remote control unit.
B5
RET button
Video return signal of channel1 on/off button.
While pressing this button, HD-SDI output
from "MON/RET output connector" and the
picture on view finder can be switched to
return picture.
B9
6
B6
CCU connector
Connector for fiber optic cable.
B7
AC230V OUT connector
Maximum 100VA (AC230V) can be supplied
to external unit.
For detail, Refer to page 75.
CAUTION
Do not connect the FS-F5 cable
during the Camera system power on.
B8
HD-SDI2 connector (BNC)
CA-HF1000
HD-SDI output.
CA-HF1200
3G HD-SDI output
CX-HD1000
HD-SDI, or SD-SDI output.
B9
PROMPT/GL connector (BNC)
CCU system: Prompter signal output.
Only camera: Genlock signal input.
(Tri-level sync or Black burst)
B1
B2
B3
B4
B5
Advertisement
Table of Contents
