Advertisement
• TASKS are numbered from 801 thru 999
• SUBTASKS are numbered from 001 thru 800.
(e)
Element 6 is a three position alphanumeric element used for identification of differences
in configurations, methods or techniques, variations of standard practice applications, etc.
(f)
Element 7 provides coding of those tasks or subtasks that have been changed by the
customer (e.g., those tasks or subtasks accomplished by an outside repair source).
Figure INTRO-3. (Sheet 1 of 1) MTOSS Code Positions (GRAPHIC 33-30-15-99B-803-A01)
Function
Code
000
REMOVAL AND DISASSEMBLY
010
Removal
020
Remove Modular Sections
030
Disassemble Modular Sections
EFFECTIVITY
ALL
© Honeywell International Inc. Do not copy without express permission of Honeywell.
COMPONENT MAINTENANCE MANUAL
15-0705
Table INTRO-2. MTOSS Function Code Definitions
Definition
Removal of the engine/component from a
workstand, transport dolly, test stand, etc., or
aircraft.
This is the first echelon of disassembly which
consists of sectionalization of the unit/engine
into primary modular sections. Modular
sections are identified by the third element
of the ATA number when removed from the
unit/engine.
This is the second echelon of disassembly
which consists of disassembly of the modular
sections into subassemblies after removal from
the unit/engine. Modular section designations
appear in the second element of the ATA
number for this echelon of disassembly.
33-30-15
Page INTRO-6
30 Mar 2017
Advertisement
