Door Removal And Temperature Control - Electrolux ICON Professional E32AR75JP Use And Care Manual

Door Removal and Temperature Control

Door Removal
If door must be removed:
Doors are heavy. It is recommended to have two people to remove or replace the door assembly from
the cabinet.
• Unplug the unit or switch the breaker that supplies
power to the unit to the off position.
• Remove the plastic top hinge cover.
• Hold the door in place while removing the top
hinge from the cabinet.
• Remove the two 3/8" hex head bolts from the top
hinge with a 3/8" wrench or socket.
• Lift the door upwards and pull up and away from
the cabinet until free of the bottom hinge pin
mounted on the front of the cabinet.
• To replace the door, reverse the above procedures
and securely tighten all screws to prevent hinge
slippage.
Setting The Custom Set™ Electronic Control
COOL DOWN PERIOD
For safe food storage, allow four (4) hours for refrigerator to cool down completely. The refrigerator will run
continuously for the fi rst several hours.
CUSTOM SET™ ELECTRONIC CONTROL
The Custom Set™ Electronic Control is located inside the refrigerator. Temperature is factory preset to provide
satisfactory food storage temperatures. However, the temperature control is adjustable to provide a range of
temperatures for your personal satisfaction.
To adjust the temperature setting, press the UP (+) key for warmer temperature and DOWN (-) key for colder
temperature on the control panel. Allow several hours for the temperature to stabilize between adjustments.
The refrigerator can be adjusted between 33°F (1°C) and 46°F (8°C). By pressing the TEMP MODE key, the
temperature display will toggle between °F to °C.
To turn the refrigerator OFF, press the UP (+) key until the warmest temperature setting of 46ºF (8ºC) shows
in the display. Then press the UP (+) key three (3) times within three (3) seconds to turn the refrigerator OFF.
The display will then scroll "OFF" across the display. To turn the unit back ON, press the DOWN key three (3)
times within three (3) seconds. The control will then display "46ºF (8ºC)" and may be adjusted to the desired
temperature.
Hinge Cover
Hinge Bolts (2)
Hinge Plate
9