Precautions for Installation
there is adequate flow of fresh air from outside the cabinet to the bottom of the appliance.
●
If the appliance is installed above a drawer or cupboard space, a thermal protection barrier
●
should be installed under the bottom of the appliance.
The isolation switch is accessible by the customer easily.
●
Notes
The appliance must be installed by qualified personnel or technicians. We have professionals
●
at your service. Please never conduct the repair by yourself.
The appliance cannot be installed directly above a dishwasher, fridge, freezer, washing
●
machine or clothes dryer, as the humidity may damage electronic elements of the appliance.
The appliance shall be installed to ensure the better heat radiation and its enhanced reliability.
●
The surrounding walls and countertops where the appliance is installed must be heat resistant.
●
To avoid any damage, the sandwich layer and adhesive must be heat resistant.
●
If the cable is damaged or to be replaced, the repair must be carried out by Panasonic service
●
center with dedicated tools to avoid any accidents.
Install a 220 V / 20 A dedicated single-phase circuit with an earth leakage circuit breaker for the
●
power supply.
The installer must ensure that the correct electrical connection has been made and it complies
●
with safety regulations.
The cable must not be bent or compressed.
●
The cable must be checked regularly and replaced by authorised technicians only.
●
The manufacturer cannot be held responsible for any accidents resulting from the use of an
●
appliance which is not connected to earth, or with wrong earth connection.
Install the socket at a location where the plug can be disconnected after installation.
●
When installing the appliance as free-standing, install the socket at a location where it is not
exposed to hot air, water or splattered food.
After installing the appliance, make sure that
Cable and socket outlet
Socket type
BS1363
EN21