Timer on, Timer off
Start and stop of operation is selected with the time. Operate after setting the current time on the remote control
Page 6
1
For timer on
●
Changes by 10 minutes when pressed once and by 1 hour when pressed
continuously.
●
The selected time is displayed
Go to 2 if the same time as a previous setting can be used.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Select
2
●
During time off, drying inside is not performed.
●
Timer off can be selected with the previous operation setting even while stopped.
The operation starts when selected.
●
To change the selected time, press
To cancel
The timer setting is released, but the operation will continue.
1122350201_00_S03_182x257_64p_S_p70_190208.indd 15
For timer off
or
to change the setting.
Example of setting
(Selection of timer On/Off)
To start at 6:00 AM and stop at 10:00 AM.
Select operation start for 6:00 AM.
1
Backward
Selected time and current operating
mode blink alternately in the pictographic
character display portion.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Set the stop time to 10:00 AM.
2
Backward
Selected time and current operating
mode blink alternately in the pictographic
character display portion.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
EN
Forward
Forward
16
2/23/2019 11:05:12 AM