Table of Contents
Advertisement
Chapter 2 Preparations
2.
Push the DIMM into the socket straight.
If the DIMM is inserted into the DIMM socket, the lever is automatically closed.
3.
Close the lever firmly.
4.
If you need to install two or more DIMMs, install them according to steps 2 through 4.
5.
Install the top cover and air duct according to Chapter 2 (1.3.4 Installation of top cover, air duct,
HSBP cover).
If Mezzanine Card (Type 2) for blade is installed, remove it according to Chapter 2 (1.6.2
Installation).
6.
Install the CPU blade having been removed to the Blade Enclosure according to the User's Guide of
the Blade Enclosure.
7.
Make sure that no error message appears on the POST screen.
If any error messages are displayed, refer to Chapter 3 (1. Error Message of POST and Virtual LCD)
in "Maintenance Guide".
8.
Run SETUP and select menus in the order of Advanced and Memory Configuration to make sure
that the status of installed DIMM is "Normal" (refer to Chapter 2 (1. System BIOS) in "Maintenance
Guide".).
9.
Set the paging file size to a value larger than the recommended value (installed memory * 1.5) (for
Windows). Refer to Installation Guide for more information.
Important
•
Make sure of the orientation of the DIMM. The connecting side of the DIMM has
a cut-out to prevent an incorrect insertion.
•
Use extreme care when inserting a DIMM. Applying too much pressure can
damage the DIMM and/or connector.
Express5800/B120e User's Guide
1. Installing Internal Optional Devices
53
Advertisement
Table of Contents
