Siemens MOBILETT Plus Service Instructions Manual page 70

8 - 6
Fig. 8
•
Pull out the cable and rewind it to bring the tension back to the cable winder spring.
Repeat that six times.
•
Reinstall upper plate with distance ring, plastic role and Y-plate.
•
Pull out the cable completely.
•
Test cable winder and brake function.
NOTE
•
Reinstallation is performed in the reverse order.
MOBILETT Plus/ - E/ - M
1
The cable winder should not rewind by itself.
The brake force is adjusted via right screw.
nut clockwise -> stronger (pos. 1 / Fig. 8).
nut counterclockwise -> softer.
SPR8-215.898.01
Rev. 05
Page 6 of 6
01.02 SPS-UD
Miscellaneous
Siemens-Elema AB
Solna, Sweden