Canon Super G3 FAX Board-AR1 Service Manual
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Fax Machine
  5. Super G3 FAX Board-AR1
  6. Service manual

Canon Super G3 FAX Board-AR1 Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
April 15, 2015
Revision 1
Super G3 FAX Board-AR1
Super G3 2nd Line Fax Board-AR1
Service Manual
Product Outline
Technology
Parts Replacing and Cleaning
Error Code
Service Mode
Installation_Super G3 FAX Board-AR1
Installation_Super G3 2nd Line Fax Board-AR1
1
2
3
4
5
6
7

Advertisement

Table of Contents
loading

Related Manuals for Canon Super G3 FAX Board-AR1

Summary of Contents for Canon Super G3 FAX Board-AR1

  • Page 1 April 15, 2015 Revision 1 Super G3 FAX Board-AR1 Super G3 2nd Line Fax Board-AR1 Service Manual Product Outline Technology Parts Replacing and Cleaning Error Code Service Mode Installation_Super G3 FAX Board-AR1 Installation_Super G3 2nd Line Fax Board-AR1...
  • Page 2 This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may changes in the contents of this manual over a long or short period, Canon will issue a new not be copied, reproduced or translated into another language, in whole or in part, without the edition of this manual.
  • Page 3 Explanation of Symbols Symbols Explanation Symbols Explanation The following symbols are used throughout this Service Manual. Cleaning is needed. Measurement is needed. Symbols Explanation Symbols Explanation Check. Remove the claw. The following rules apply throughout this Service Manual: Each chapter contains sections explaining the purpose of specific functions and the Check visually.

  • Page 4: Table Of Contents

    Contents Safety Precautions Service Mode Composition ------------------------------------------------------ 5-2 Using Service Mode --------------------------------------------------------------- 5-2 Notes Before it Works Serving ---------------------------------------------0-2 Menu Items -------------------------------------------------------------------------- 5-3 Setting of Bit Switch (SSSW) ----------------------------------------------5-5 Product Outline Bit Switch Composition ----------------------------------------------------------- 5-5 Specifications ------------------------------------------------------------------1-2 SSSW-SW01 -------------------------------------------------------------------------------- 5-5 SSSW-SW03 -------------------------------------------------------------------------------- 5-6 Technology SSSW-SW04 -------------------------------------------------------------------------------- 5-7...
  • Page 5 Installation_Super G3 2nd Line Fax Board-AR1 Relay Test (RELAY-1) ---------------------------------------------------------------------5-17 Frequency Test (FREQ) ------------------------------------------------------------------5-17 How to Check this Installation Procedure -------------------------------7-2 G3 Signal Transmission Test (G3 Tx) ------------------------------------------------5-18 Symbols in the illustration -------------------------------------------------------- 7-2 DTMF Transmission Test ----------------------------------------------------------------5-18 Check Items when Turning OFF the Main Power: --------------------7-2 V.34 G3 Signal Transmission Test (V34G3Tx) -------------------------------------5-19 Points to Note at Installation -----------------------------------------------7-2 Function Test -----------------------------------------------------------------------5-19...

  • Page 6: Safety Precautions

    Safety Precautions ■ Notes Before it Works Serving...

  • Page 7: Notes Before It Works Serving

    Notes Before it Works Serving CAUTION: At servicing, be sure to turn off the power source according to the specified steps and disconnect the power plug. CAUTION: Do not turn off the power switch (of the host machine) when downloading is under way. Turning off the main power switch while downloading is under way can disable the machine.
  • Page 8 Product Outline ■ Specifications Product Outline Product Outline...

  • Page 9: Product Outline Specifications

    256 gradations Recording unit maximum reception size: A3 (297 mm x 420 mm) scanning line density: 600 dpi x 600 dpi Memory image memory (Canon Fax Standard Chart No.1): HDD Model: 20000 prints memory type: Hard disk storage: JBIG Extension telephone connection...

  • Page 10: Technology

    Technology ■ Basic Construction ■ Controls Technology Technology...

  • Page 11: Fax Communication Control

    Super G3 FAX Board-AR1 FAX Interface Speaker FAX unit for two line Modular PCB (2nd line) Super G3 2nd Line Fax Board-AR1 F-2-2 F-2-1 [1] Super G3 FAX Board-AR1 G3 FAX PCB Technology Technology > Controls > FAX communication control...

  • Page 12: Parts Replacing And Cleaning

    Parts Replacing and Cleaning ■ Parts List ■ Parts Replacing and Cleaning Parts Replacing and Cleaning Parts Replacing and Cleaning...

  • Page 13: Pcbs

    Parts Replacing and Cleaning Parts Replacing and Cleaning > Parts List > PCBs Parts List PCBs Part name Reference G3 FAX PCB 2nd Line Fax Board Modular PCB T-3-1 F-3-1 Parts Replacing and Cleaning Parts Replacing and Cleaning > Parts List > PCBs...

  • Page 14: Parts Replacing And Cleaning

    Parts Replacing and Cleaning Parts Replacing and Cleaning > Parts Replacing and Cleaning > Removing the G3 Fax Unit > Procedure Parts Replacing and Cleaning 2) Remove the 2 Wire Saddles [1]. Removing the G3 Fax Unit ■ Preparation 1) Remove the Cover (Rear Upper). 2) Remove the Right Cover (Rear Upper).

  • Page 15: Removing The 2Nd Line Fax Board

    Parts Replacing and Cleaning Parts Replacing and Cleaning > Parts Replacing and Cleaning > Removing the 2nd Line Fax Board > Procedure Removing the 2nd Line Fax Board 4) Remove the Fax Unit. • 2 Hooks [1] ■ Preparation • 2 Bosses [2] •...

  • Page 16: Error Code Overview

    Error Code ■ Overview ■ User Error Code ■ Service Error Code Error Code Error Code...
  • Page 17 Error Code Error Code > Overview > Guide to Error Code Overview Bit1 -> 1: to cause the machine to send EPT. -> 0: to cause the machine not to send EPT. Guide to Error Code - Adjust the NL equalizer. When the Board has been installed and '1' is set for service data #1 SSSW SW01 bit 0, Set '1' for serve data #2 MENU parameter No.
  • Page 18 Error Code Error Code > User Error Code User Error Code Description #407 The length of the full path to the specified file (or folder) exceeded the supported limit. Description The transmission to the USB memory media device was not properly performed #001 Different sized originals were scanned without setting the Different Size Originals because the length of the full path including the root and file name exceeded the...
  • Page 19 Error Code Error Code > User Error Code Description Description #771 #825 The setting for the Remote Fax Server Address is incorrect. The Department ID and password set on the host machine do not match those The Remote Fax Server has not been started. registered in the cascade copy printers.
  • Page 20 Error Code Error Code > User Error Code Description Description #850 #876 Device information could not be delivered because the destination client machine is Received a response from the destination stating that the size of the data was too operating a screen related to the device information. large when sending with WebDAV (received HTTP Error 413: Request Entity Too Large).
  • Page 21 Error Code Error Code > Service Error Code Service Error Code No.*1 No.*2 T/R Description ##283 ##3283 [T] at time of transmission, the procedural signal has been transmitted more than specified. Code Cause Remedy ##284 ##3284 [T] at time of transmission, DCN is received after transmission of TCF. ##3016 [T/R] An instruction of disconnection Perform a communication again.
  • Page 22 Error Code Error Code > Service Error Code No.*1 No.*2 T/R Description No.*1 No.*2 T/R Description ##758 ##3758 [T] at time of ECM transmission, the procedural signal has been transmitted ##780 ##3780 [T] at time of ECM transmission, no meaningful signal is received after more than specified after transmission of PPS-MPS, or T5 time-out (60 sec) transmission of EOR-EOM, causing the procedural signal to be transmitted has occurred.

  • Page 23: Service Mode

    Service Mode ■ Outline ■ Setting of Bit Switch (SSSW) ■ Setting of Menu Switch (MENU) ■ Setting of Numeric Parameter (NUMERIC Param.) ■ Setting of Destination (TYPE) ■ Setting of Printer Functions (PRINTER) ■ Initialization of Set Value (CLEAR) ■...

  • Page 24: Service Mode Composition

    Service Mode Service Mode > Outline > Using Service Mode Outline Using Service Mode To enter Service Mode. Service Mode Composition 22) The machine will indicate the accessories that are connected to it (e.g., FEEDER, FAX, BOARD). The Board's service mode consists of the following 10 items (#1 through #10): Select [FAX] to use service mode items available for the Board.

  • Page 25: Menu Items

    Service Mode Service Mode > Outline > Menu Items Menu Items For instance, in the case of #1 SSSW, the following holds true; key functions and operations are the same for all screens: #1 SSSW SW01 error management Menu Num Ncu Type Sssw ISDN Print Clear Test...
  • Page 26 Service Mode Service Mode > Outline > Menu Items not used #7 PRINT BIT SW SW01 to SW04 reduction/cassette selection SW05 reduction setting SW06 not used SW07 to SW20 maximum non-image range not used not used leading edge margin trailing edge margin not used 006 to 030 F-5-6...

  • Page 27: Setting Of Bit Switch (Sssw)

    Service Mode Service Mode > Setting of Bit Switch (SSSW) > Bit Switch Composition > SSSW-SW01 Setting of Bit Switch (SSSW) ■ SSSW-SW01 ● Functional Construction Bit Switch Composition Function 0 service error code output not output The registration/setup items of the switch are set according to the positions of its 8 bits; the 1 error dump list output not output...

  • Page 28: Sssw-Sw03

    Service Mode Service Mode > Setting of Bit Switch (SSSW) > Bit Switch Composition > SSSW-SW03 ■ SSSW-SW03 Using the Dial Recognition Function (user level): Select 'international transmission (1)' when making an entry in the Address Book. If errors ● Functional Construction still occur, select 'international transmission (2)' and then 'international transmission (3)' in sequence until errors stop.

  • Page 29: Sssw-Sw04

    If 'prohibit' is selected, the Super Fine reception function or Memory Box function cannot speed' for reception mode and, at the same time, selects 'do not receive' for 'ECM reception.' be used for communications from non-Canon machines. NOTE: Any of the following error codes may be indicated at time of reception because of line...

  • Page 30: Sssw-Sw12

    Service Mode Service Mode > Setting of Bit Switch (SSSW) > Bit Switch Composition > SSSW-SW14 ■ SSSW-SW12 ■ SSSW-SW14 ● Functional Construction ● Functional Construction Function Function 0 Time-out period for one page upon transmission 0 not used 1 Time-out period for one page upon transmission 1 not used 2 Time-out period for one page upon (HT transmission) 2 direction of scanning for inch/mm...

  • Page 31: Sssw-Sw25

    Service Mode Service Mode > Setting of Bit Switch (SSSW) > Bit Switch Composition > SSSW-SW28 ■ SSSW-SW25 ■ SSSW-SW28 ● Functional Construction ● Functional Construction Function Function 0 transmission telephone number indicated report other party's caller's 0 Caller V.8 protocol 1 not used 1 Called party V.8 protocol 2 not used...

  • Page 32: Sssw-Sw30

    Service Mode Service Mode > Setting of Bit Switch (SSSW) > Bit Switch Composition > SSSW-SW30 5-10 Detailed Discussions of Bit 4 Caution: Select whether the receiver falls back during V.34 reception. If 'Prohibit' is selected, the receiver does not fall back. Be sure to switch the following switches when switching the switch.

  • Page 33: Setting Of Menu Switch (Menu)

    Service Mode Service Mode > Setting of Menu Switch (MENU) > Menu Switch Composition 5-11 Setting of Menu Switch (MENU) <006: Telephone Line Monitor> Use it to the telephone line monitor function: 0(DIAL): generate the monitor sound of the telephone line using the speaker from the start of Menu Switch Composition transmission to DIS.

  • Page 34: Setting Of Numeric Parameter (Numeric Param.)

    Service Mode Service Mode > Setting of Numeric Parameter (NUMERIC Param.) > Numerical Parameter Composition 5-12 Setting of Numeric Parameter (NUMERIC Param.) <002: RTN transmission condition (1)><003: RTN transmission condition (2)><004: RTN transmission condition (3)> Use it to set RTN signal transmission conditions. Raise these parameters for more lenient Numerical Parameter Composition conditions if errors occur frequently at time of reception because of transmission of the RTN signal.

  • Page 35: Setting Of Destination (Type)

    Service Mode Service Mode > Setting of Destination (TYPE) > Overview 5-13 Setting of Destination (TYPE) <010: line connection identification length> Use it to set the time for identifying the line connection. Raise this parameter if errors occur frequently at time of communication because of the Overview condition of the line.

  • Page 36: Setting Of Printer Functions (Printer)

    Service Mode Service Mode > Setting of Printer Functions (PRINTER) > Setting of Bit Switch (SSSW) > SSSW-SW06 5-14 Setting of Printer Functions (PRINTER) ■ SSSW-SW06 ● Functional Construction Setting of Bit Switch (SSSW) Function 0 not used ■ SSSW-SW05 1 not used 2 not used ●...

  • Page 37: Setting Of Numeric Parameter (Numeric Param.)

    Service Mode Service Mode > Initialization of Set Value (CLEAR) > Overview 5-15 Setting of Numeric Parameter (NUMERIC Param.) Initialization of Set Value (CLEAR) Overview Sssw Menu Num Ncu Type IPFAX Print Clear Test Report <NUM> <1/4> <READY> You can select and initialize data by making the following selections; as a result, settings and xxxxx ←（yyyyy）{aaaaa～bbbbb} various parameter values will be reset to the factory settings.

  • Page 38: Test Mode (Test)

    Service Mode Service Mode > Test Mode (TEST) > Outline > Test Mode Construction 5-16 Test Mode (TEST) The following table shows text mode items that are valid and invalid when a fax board is installed: yes: may be used Outline -: not used Level 1...

  • Page 39: Modem Test

    Service Mode Service Mode > Test Mode (TEST) > MODEM Test > Frequency Test (FREQ) 5-17 MODEM Test ■ Frequency Test (FREQ) Of the items indicated below, press one; in response, the DC circuit will be closed and the ■ Relay Test (RELAY-1) selected frequency will be transmitted using the tone transmission function of the modem.

  • Page 40: G3 Signal Transmission Test (G3

    Service Mode Service Mode > Test Mode (TEST) > MODEM Test > DTMF Transmission Test 5-18 ■ G3 Signal Transmission Test (G3 Tx) ■ DTMF Transmission Test Of the items indicated below, press one. In response, the DC circuit will be closed and the Of the items indicated below, press one;...

  • Page 41: G3 Signal Transmission Test (V34G3Tx)

    Service Mode Service Mode > Test Mode (TEST) > Function Test > 4800-bps Signal Transmission Test 5-19 Function Test ■ V.34 G3 Signal Transmission Test (V34G3Tx) Select the transmission speed you want to test, and then select a modulation speed (baud ■...

  • Page 42: Service Report (Report)

    Service Mode Service Mode > Service Report (REPORT) > System Dump List 5-20 Service Report (REPORT) System Dump List System Data List MEMO: A system dump list is generated when you execute the following in service mode: FAX > Report > DUMP. Use it to check the settings associated with the service soft switch and service parameters.

  • Page 43: Error Transmission Report

    Service Mode Service Mode > Service Report (REPORT) > Error Transmission Report 5-21 Error Transmission Report It provides error information on the 3 most recent communications. 2003 09/02 TUE 12:00 An error transmission report is an error transmission report together to which a service error #1 LATEST #000 START TIME...

  • Page 44: Dcm

    • Super G3 FAX Board-AL1 (iR-ADV 8205/8285/8295/6275/6265/6255 Series) • Super G3 FAX Board-AP1 (iR-ADV 4245/4235/4225 Series) • Super G3 FAX Board-AR1 (iR-ADV C3330/ C3325/ C3320 Series) • If the FAX Board is not installed on the distributing device, export of service mode related F-5-27 to fax is not performed.
  • Page 45 Service Mode Service Mode > DCM > Service modes related to fax of DCM > Import/export by service mode 5-23 3. Select [PASSWD], enter a password from the software keyboard. ● Import 1. Log in to service mode and press [RESTORE]. F-5-29 4.
  • Page 46 Service Mode Service Mode > DCM > Service modes related to fax of DCM > Import/export by service mode 5-24 4. Press [ -> ]. 7. "OK!" is displayed in the status column when the processing is successfully completed. F-5-38 F-5-35 5.

  • Page 47: Installation_Super G3 Fax Board-Ar1

    Installation Super G3 FAX Board-AR1 ■ How to Check this Installation Procedure ■ Check Items when Turning OFF the Main Power ■ Points to Note at Installation ■ Installation Outline Drawing ■ Checking the Contents ■ Installation Procedure ■ Operation Setting Installation_Super G3 FAX Board-AR1 Installation_Super G3 FAX Board-AR1...

  • Page 48: Symbols In The Illustration

    Installation_Super G3 FAX Board-AR1 Installation_Super G3 FAX Board-AR1 > Installation Outline Drawing How to Check this Installation Procedure Points to Note at Installation • When installing this equipment and the Super G3 2nd Line Fax Board-AR1 at the same Symbols in the Illustration time, be sure to start from "Installation Procedure >...

  • Page 49: Checking The Contents

    Installation_Super G3 FAX Board-AR1 Installation_Super G3 FAX Board-AR1 > Installation Outline Drawing Checking the Contents Installation Procedure Remove the Covers <For Europe> <For Others> M3x6 Approval Labele Only for Europe F-6-5 6 Contadt type F-6-4 <Others> • Including guides F-6-6 Installation_Super G3 FAX Board-AR1 Installation_Super G3 FAX Board-AR1 >...

  • Page 50: Installing The Fax Unit

    Installation_Super G3 FAX Board-AR1 Installation_Super G3 FAX Board-AR1 > Installation Outline Drawing NOTE: When installing the Super G3 2nd Line Fax Board-AR1 at the same time, do not perform the following procedure, but start from "Installation Procedure > Installing the Fax Board"...

  • Page 51: Installing The Covers

    Installation_Super G3 FAX Board-AR1 Installation_Super G3 FAX Board-AR1 > Installation Outline Drawing Installing the Covers NOTE: Wire Saddle [A]: Secure the 2 cables. Wire Saddle [B]: Secure the 1 cable. Wire Saddle[A] F-6-11 Wire Saddle[B] F-6-10 F-6-12 NOTE: Store the removed Face Cover in the Tray Guide in step 5. Installation_Super G3 FAX Board-AR1 Installation_Super G3 FAX Board-AR1 >...
  • Page 52 Installation_Super G3 FAX Board-AR1 Installation_Super G3 FAX Board-AR1 > Installation Outline Drawing NOTE: Store the Face Cover removed in step 2 in the Tray Guide. NOTE: Storing the Face Cover • The storage locations differ depending on the number of Face Covers ("Less than 4 Face Covers"...

  • Page 53: Procedure After Work

    Installation_Super G3 FAX Board-AR1 Installation_Super G3 FAX Board-AR1 > Installation Outline Drawing Procedure after Work F-6-17 NOTE: Affix the FAX Authentication Label. [1] : For Europe [2] : For USA and Taiwan F-6-16 F-6-18 Installation_Super G3 FAX Board-AR1 Installation_Super G3 FAX Board-AR1 > Installation Outline Drawing...
  • Page 54 Installation_Super G3 FAX Board-AR1 Installation_Super G3 FAX Board-AR1 > Installation Outline Drawing 3) Connect the PTT Plug matched the field or area to the Telephone Cable (6 contact type). 4) Connect the end of the PTT Cable or Telephone Cord to the Modular Jack (LINE) on the host machine, and connect the other end to the Modular Jack on the wall.

  • Page 55: Operation Setting

    Installation_Super G3 FAX Board-AR1 Installation_Super G3 FAX Board-AR1 > Installation Outline Drawing Operation Setting Fax communication test Perform the communication test to check if FAX function works Correctly. Type setting 1) Switch the control panel display to [Fax] display. Select the country/region of the FAX Board in Service Mode (level 1) : FAX > TYPE > TYPE 2) Send the test document from this machine to another machine that can handle the This setting performs the parameter settings to match the communication specification of the communication test to check that this machine can send the data correctly.

  • Page 56: Installation_Super G3 2Nd Line Fax Board-Ar1

    Installation Super G3 2nd Line Fax Board-AR1 ■ How to Check this Installation Procedure ■ Check Items when Turning OFF the Main Power: ■ Points to Note at Installation ■ Installation Outline Drawing ■ Checking the Contents ■ Installation Procedure ■...

  • Page 57: Symbols In The Illustration

    Installation_Super G3 2nd Line Fax Board-AR1 Installation_Super G3 2nd Line Fax Board-AR1 > Installation Outline Drawing How to Check this Installation Procedure Points to Note at Installation • Be sure to install this equipment after the installation of the Super G3 FAX Board (1-Line) is Symbols in the illustration complete.

  • Page 58: Checking The Contents

    Installation_Super G3 2nd Line Fax Board-AR1 Installation_Super G3 2nd Line Fax Board-AR1 > Installation Procedure > Remove the Covers Checking the Contents Installation Procedure Remove the Covers NOTE: When a Telephone Cord is connected, disconnect it. M3x6 Only for Europe 6 Contadt type F-7-5 Approval Labele...

  • Page 59: Removing The Super G3 Fax Board (When The Super G3 Fax Board Is Installed)

    Installation_Super G3 2nd Line Fax Board-AR1 Installation_Super G3 2nd Line Fax Board-AR1 > Installation Procedure > Removing the Super G3 FAX Board (When the Super G3 FAX Board is installed) Removing the Super G3 FAX Board (When the Super G3 FAX Board is installed) CAUTION: Do not touch the speaker area of Fax Unit directly.

  • Page 60: Installing The Fax Board

    Installation_Super G3 2nd Line Fax Board-AR1 Installation_Super G3 2nd Line Fax Board-AR1 > Installation Procedure > Installing the Fax Board Installing the Fax Board CAUTION: • When installing this equipment and the Super G3 FAX Board (1-Line) simultaneously, perform the following steps. •...
  • Page 61 Installation_Super G3 2nd Line Fax Board-AR1 Installation_Super G3 2nd Line Fax Board-AR1 > Installation Procedure > Installing the Fax Board F-7-13 F-7-15 F-7-14 F-7-16 Installation_Super G3 2nd Line Fax Board-AR1 Installation_Super G3 2nd Line Fax Board-AR1 > Installation Procedure > Installing the Fax Board...
  • Page 62 Installation_Super G3 2nd Line Fax Board-AR1 Installation_Super G3 2nd Line Fax Board-AR1 > Installation Procedure > Installing the Fax Board NOTE: Secure the included in [A] Cable in place using the Wire Saddle. M3x6 F-7-17 F-7-18 F-7-19 Installation_Super G3 2nd Line Fax Board-AR1 Installation_Super G3 2nd Line Fax Board-AR1 >...
  • Page 63 Installation_Super G3 2nd Line Fax Board-AR1 Installation_Super G3 2nd Line Fax Board-AR1 > Installation Procedure > Installing the Fax Board NOTE: NOTE: Use the screws and the FAX Frame removed in step 1. Use the screws removed in step 3 of "Removing the Super G3 FAX Board (When the Super G3 FAX Board is installed)".
  • Page 64 Installation_Super G3 2nd Line Fax Board-AR1 Installation_Super G3 2nd Line Fax Board-AR1 > Installation Procedure > Installing the Fax Board NOTE: If the 2 Wire Saddles are not installed, install them (they are included in the package of the Super G3 FAX Board). F-7-25 NOTE: Wire Saddle [A]: Secure the 3 cables.

  • Page 65: Installing The Covers

    Installation_Super G3 2nd Line Fax Board-AR1 Installation_Super G3 2nd Line Fax Board-AR1 > Installation Procedure > Installing the Covers 7-10 Installing the Covers F-7-29 F-7-27 NOTE: When installing the Super G3 FAX Board (1-Line) at the same time, remove the Face Cover of the 1-Line.
  • Page 66 Installation_Super G3 2nd Line Fax Board-AR1 Installation_Super G3 2nd Line Fax Board-AR1 > Installation Procedure > Installing the Covers 7-11 NOTE: Store the Face Cover removed in step 2 in the Tray Guide. NOTE: Storing the Face Cover • The storage locations differ depending on the number of Face Covers ("Less than 4 Face Covers"...

  • Page 67: Procedure After Work

    Installation_Super G3 2nd Line Fax Board-AR1 Installation_Super G3 2nd Line Fax Board-AR1 > Installation Procedure > Procedure after Work 7-12 Procedure after Work Connect the PTT Plug matched the field or area to the Telephone Cable (6 contact type). NOTE: This step is only for Europe.

  • Page 68: Operation Setting

    Installation_Super G3 2nd Line Fax Board-AR1 Installation_Super G3 2nd Line Fax Board-AR1 > Operation Setting > Basic Settings 7-13 Operation Setting 4) Connect the end of the PTT Cable or Telephone Cord to the Modular Jack (LINE 1 and LINE 2) on the host machine, and connect the other end to the Modular Jack on the wall. Type Setting Select the country/region of the FAX Board in Service Mode: FAX >...

  • Page 69: Fax Communication Test

    Installation_Super G3 2nd Line Fax Board-AR1 Installation_Super G3 2nd Line Fax Board-AR1 > Operation Setting > FAX Communication Test 7-14 FAX Communication Test Perform communication test to check if FAX function works correctly. 1) Switch the control panel display to [Fax] display. 2) Select the sending line.

This manual is also suitable for:

Super g3 2nd line fax board-ar1

Table of Contents