Advertisement
Press
buttons to select PICTURE menu and then press OK button to enter. Use
the following picture options and then use
Picture Mode
Blue Screen
Brightness
Contrast
Color
Sharpness
Tint
Color Temp.
Format
Advanced Settings
PICTURE
buttons to set each option's setting.
Cycle among picture mode: Standard/Cinema/Game Mode(in HDMI
or VGA mode)/Custom/Vivid.
Alternative: you may press the P.MODE button to select the
picture mode directly.
Allow the blue background to turn On/Off during weak or no signal
conditions.
Increase or decrease the amount of white in the picture.
Adjust the difference between light and dark levels in the pictures.
Control the color intensity.
Adjust the level of crispness in the edges between light and dark
areas of the picture.
Adjust the balance between red and green levels.
Cycle among color temperatures: Cool/Normal/Warm.
Adjust the Standard/Wide/Wide Zoom/Zoom/Just Scan(only HDMI).
Adjust the following advanced settings:
Color Space: Color Mode: Standard/Dynamic/Custom.
Color: In Custom mode, cycle among Cyan/Magenta/Yellow/Red/
Green/Blue.
Hue/Saturation/Brightness: Adjust the settings in Custom
mode.
Reset: Reset the settings in color space.
White Balance: Adjust Red Gain/Green Gain/Blue Gain/Red
Offset/ Green Offset/Blue Offset/Reset.
MEMC: Set the MEMC among Middle/High/Off/Low.
Dynamic Luminance: Turn On/Off the dynamic luminance.
Noise Reduction: Set the noise reduction among Medium/Strong/
Off/Weak.
buttons to select
23
Advertisement
