Yamaha DRIVE 2 SUPER HAULER 2019 Owner's/Operator's Manual page 35

J2F
MAINTENANCE
Battery Installation
When working with batteries, do not
put wrenches or other metal objects
across the battery terminals. An arc
can occur causing explosion of the
battery.
1. Install the battery hold-down
plates and torque to 7-9 Nm,
0.7-0.9 m · kg (62-80 in · lb) as
shown.
Y-751D
å Forward
∫ Battery
ç Battery hold-down plate
2. Connect the wire leads and
torque to 9-10 Nm, 0.9-1.0 m · kg
(80-89 in · lb) as shown.
When installing batteries:
• Carefully place battery cables
and hold-downs making sure
that cables do not lay across
vent caps.
Y-672h
• Always remove the negative (–)
cable to the motor controller
first and install it last. A spark
can occur causing an explosion
or fire at the battery.
NOTICE
Do not over-tighten the battery
holddown nuts. Excessive force
will damage the battery casing.
8
8-7