Introduction
1.1
Introduction
Purpose of this documentation
These operating instructions contain the information you require to commission, operate and
service the HCS4300 heating control system.
Target group
The documentation is intended for qualified personnel in the following specialist fields:
● Operators, project engineers, programmers
● Electrically skilled personnel who assemble, connect and start up the device.
Required basic knowledge
● These operating instructions require prior knowledge of programming an S7 controller or
SIMOTION.
● Knowledge of working with the PROFINET or PROFIBUS fieldbus is also necessary.
History
The following earlier release versions of these operating instructions have been published:
Edition
11/2014
10/2015
SIPLUS HCS4300
Operating Instructions, 11/2015, A5E35452705A/002
Note
First edition
Expansion to include POM with panel mounting, PROFIBUS, I/O modules, ex-
pansion module for additional 2 x 8 POMs
1
9