Table of Contents
Advertisement
RRU3260
Installation Guide
Figure 8-8 Installing the first RRU onto the main bracket
Step 2 Use an M6 inner hexagon screwdriver to remove the four inner hexagon screws from the
second set of mounting brackets, and remove the main bracket from the auxiliary bracket, as
shown in
Figure 8-9 Removing the RRU main bracket
(1) Main bracket
Step 3 Install the removed main bracket on one side of the first main bracket, as shown in
8-10.
The second main bracket must be installed with the opening ends of U-shaped slots on both
sides facing downwards.
Issue 10 (2015-12-30)
Figure
8-9.
NOTICE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(2) Pole installation bracket
8 Installing the RRU
Figure
55
Advertisement
Table of Contents
