Black & Decker BD61516 Instruction Manual page 10

SET UP & USE
7. Remove one screw from the other side and insert in the previously
removed screw holes. Tighten the screw. Remove the adjustable
leveling leg from the other side, then install to the opposite
corresponding hole and tighten it.
8. Remove the door pin from the lower hinge bracket by turning it
counter-clockwise, then reinsert it into the neighboring treaded hole
and tighten.
9. Align the door with the cabinet first. Then install the lower hinge
bracket to the bottom opposite side of the cabinet. Then insert (2)
remaining screws into the holes. Tighten the screws.
10. Align top hinge bracket with screw holes, insert screws and partially
secure, check that door and cabinet are properly aligned and then
secure tightly.
NOTE:
If the top of the door is not aligned with the cabinet, loosen the top
hinge screws, adjust door and re-tighten the screws.
Top hinge and
hinge cover
Cabinet hole plug
Door hole
plug
Lower hinge
Leveling leg
bracket
with leveling leg
Page 10
Door Pin
Top hinge and
hinge cover
Cabinet hole plug
Leveling leg
Door Pin
Door hole
plug
Lower hinge
bracket
with leveling leg