LG STB-6500 Installation Manual page 29

One Channel Map
(Depending on model)
• If set to 'Enable' , the STB will operate as below.
- A. When the STB is auto-scanning, it searches both air and cable channels.
- B. User can assign a channel number him/herself by manual scan.
- C. In 'Programme Edit' window, all channels are shown in a single list regardless of input source.
- D. Automatically scanned channels may not have the user-desired channel numbers.
• If user change the 'Enable/Disable' value, an pop-up window will be displayed to warn that all channel will be deleted. The Default value is 'Enable' .
DTV Programme Update
(Depending on model)
• It is a mode to set whether to update DTV programme automatically or not.
• When set to 'Auto' , update programme map according to DTV programme' s stream information.
• When set to 'Manual' , keep programme map even though DTV programme' s information is changed.
On Timer Operation
• It is a mode to select Timer Power On working one time or repeatedly.
• 'Once': 'Timer Power On' in the user menu operates only one time.
• 'Repeat' : 'Timer Power On' operates repeatedly.
29