Sony PlayStation VR Instruction Manual page 8

• Black (dark) pixels and continuously lit pixels may appear in
certain locations on the screen. The appearance of such spots is
a normal occurrence associated with screens and is not a sign
of a system malfunction. Screens are made using highly precise
technology. However, a very small number of dark pixels or
continuously lit pixels may exist and colour irregularities or
brightness irregularities may be visible on each screen.
Never disassemble or modify the product or accessories
Use the product and accessories according to the instructions in
this manual. No authorisation for the analysis or modification of
the product, or the analysis and use of its circuit configurations, is
provided. Disassembling will void the product warranty.
Additionally, there is a risk of fire, electrical shock or malfunction
if the product is disassembled or modified.
Moisture condensation
If PS VR is brought directly from a cold location to a warm one,
moisture may condense inside the VR headset and the processor
unit. Should this occur, the product may not operate properly. In
this case, turn off the VR headset and unplug the AC power cord
from the electrical outlet. Do not use the product until the
moisture evaporates (this may take several hours). If the product
still does not operate properly, visit our website (
Unusual or unresponsive behaviour
Press the (power) button (
at least 7 seconds to force a shutdown, and then turn
on the headset again. If the problem persists, restart the
PS4 console.
8
back cover).
page 11) on the VR headset for
High temperature message
• If the processor unit's internal temperature becomes elevated, a
message will be displayed. In this case, turn off the PS4 console
and leave it unused for a while. After the processor unit cools
down, move it to a location with good ventilation, and then
resume use.
• Do not block the processor unit's vents, and do not use the
product in a closed cabinet or other locations where heat may
build up.
AC adaptor and AC power cord use
• Use an electricity supply that is easily accessible, so the AC
power cord can be unplugged quickly if the need arises. Stop
use, unplug the AC power cord from the electricity supply and
disconnect any other cables immediately if the product
functions in an abnormal manner, produces unusual sounds or
smells or becomes too hot to touch.
• Unplug the AC power cord from the electricity supply when the
status indicator on the processor unit is red. Unplugging the
cord while the indicator is white or flashing red may cause a
malfunction.
• Do not use an AC adaptor or AC power cord other than those
supplied with the product. The supplied AC adaptor and AC
power cord are designed exclusively for use with this product.
They cannot be used with other products. In addition, other AC
adaptors or AC power cords cannot be used with this product.
Failure to follow these precautions may cause the product to
overheat and may lead to fire or electric shock.
ˋ Do not plug the AC power cord for the product into
an electricity supply until you have connected the
HDMI™ cables.