Loading & Unloading Discs; Loading The Vgp-Xl1B Changer/Recorder - Sony VAIO VGP-XL1B User Manual

Loading & Unloading Discs

Loading the VGP-XL1B Changer/Recorder

Before you load discs into the VGP-XL1B Changer/Recorder for
the first time, please do the following:
1 Make sure the Changer/Recorder is properly connected to the host
computer and is turned on.
2 Make sure the system is connected to the Internet and the Internet
connection is working properly.
3 Start Media Center Setup and verify that the correct options were
selected during setup. From the main menu, select
General | Media Center Setup | Run Media Center Setup
4 Select Yes
automatically connect to the Internet to get this information?"
5 Select Yes
connection?", if this is so.
Once you have completed this procedure, continue with loading
discs into the Changer/Recorder.
Note: When loading discs, make sure that the label is facing to the
right of the slot.
To load a single disc
• Press the
of the optical drive located on the front panel.
To load multiple discs
• Press the
slot of the optical drive one at a time. The Changer/Recorder
carousal keeps rotating open slots to the drive until all slots are
filled or until no disc is inserted after 15 seconds.
24
when asked, "Do you want Media Center to
when asked, "Do you have an always on Internet
Load button once and insert the disc in the open slot
Load button twice and insert each disc in the open
Settings |
Again.
VGP-XL1B User Guide