Lamp Hour Reset - Acer PD525 User Manual

Xga single chip 0.7” dlp projector
Hide thumbs Also See for PD525:
Table of Contents

Advertisement

User Controls
English ...
26
Source Lock
When source lock is turned off, the projector will search for other
signals if the current input signal is lost. When source lock is turned
on, it will "Lock" the current source channel before you press
"Source" button on remote control for next channel.
Lamp Hour Elapse
Displays the lamp's elapsed operating time (in hours).

Lamp Hour Reset

Press the
button after choosing "Yes "to turn the lamp hour
counter to 0 hours.
Lamp Reminding
Choose this function to show or to hide warning message when the
changing lamp message is displayed. The message will show up 30
hours before end of life.
OSD Transparency
Adjusts the OSD's transparency.
Start-up Screen
Use this function to slect your desired start-up screen. If you
change the setting from one to another, when you exit the OSD
menu, the new setting will take effect.
4
Acer : The default start-up screen of Acer projector.
4
User : The user customized start-up scren, which is down loaded
from PC to projector via the USB cable and My Start-up Screen
utility (refer to the description of below section).
Management
(Computer / Video
Mode)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents