Lcd Module Disassembly Process; Lcd Module Disassembly Flowchart - Acer Aspire One AOD250 Service Manual

LCD Module Disassembly Process

IMPORTANT: Cable paths and positioning may not represent the actual model. During the removal and
replacement of components, ensure all available cable channels and clips are used and that the cables are
replaced in the same position.
NOTE: The product previews seen in the disassembly procedures may not represent the final product color or
configuration. The following procedure outlines the steps to disassemble the LCD Module on models with 3G
functionality. Models that do not support 3G do not require the removal of the yellow and blue Antenna cables
detailed below.

LCD Module Disassembly Flowchart

Screw List
Step
LCD Bezel
LCD Panel
LCD Brackets
Chapter 3
Panel from Main
Remove
LCD FPC Cable LCD Brackets
Screw
M2*4 4
M2*4 2
M2*3 6
Remove LCD
Unit before
proceeding
Remove
LCD Bezel
Remove Remove
LCD Panel Camera Module
Remove Remove
Antennas
Quantity
86.S6802.001
86.S6802.001
86.S6802.003
Part No.
75