Table of Contents
Advertisement
[NORMAL]
[INTERVAL]
(Factory setting: [NORMAL])
@
NOTE
t For the combinations and restrictions of the settings, refer to "Recording function that cannot be used simultaneously" (page 204).
[REC MODE HOLD]
Selects whether to hold [REC MODE] settings.
[ON]
[OFF]
(Factory setting: [OFF])
[INTERVAL TIME]
Sets the interval duration for interval recording.
The items that can be set are as follows.
f [1s], [2s], [5s], [10s], [30s], [1min], [5min], [10min]
(Factory setting: [5min])
[TC/UB]
[TC PRESET]
Sets the default value of the time code to record.
Hour
Minute
Second
Frame
(Factory setting: [00]) (each item)
[UB PRESET]
Sets user bits.
Enabled only when [USER] is selected in [UB MODE] of [TC/UB].
Each digit can be set in following range.
f [00]...[FF]
(Factory setting: [00])
[FREE/REC RUN]
Sets the operation mode to advance the time code generator.
[FREE RUN]
[REC RUN]
(Factory setting: [REC RUN])
@
NOTE
t The setting is fixed to [REC RUN] when the [SCENE FILE] menu → [VFR] → [ON] is set.
t The setting is fixed to [REC RUN] when the [SYSTEM] menu → [SUPER SLOW] → [ON] is set.
t The setting is fixed to [FREE RUN] when the [RECORDING] menu → [PRE REC] → [ON] is set.
t The setting is fixed to [FREE RUN] when the [RECORDING] menu → [2 SLOTS FUNC.] → [BACKGR REC] is set.
t The setting is fixed to [REC RUN] when the [RECORDING] menu → [REC FUNCTION] → [REC MODE] → [INTERVAL] is set.
[DF/NDF]
Sets the count method for the time code generator.
Enabled only when the recording frame frequency of the [SYSTEM] menu → [REC FORMAT] is set to 59.94i/59.94p/29.97p.
[DF]
[NDF]
(Factory setting: [DF])
@
NOTE
t The setting is fixed to [NDF] when the [RECORDING] menu → [REC FUNCTION] → [REC MODE] → [INTERVAL] is set.
[UB MODE]
Selects the user bits mode. User bits information is recorded in the clip. Also, it is output as LTC UB, VITC UB of the SDI signal.
[FRAME RATE]
[USER]
Chapter 4 Operation — Menu settings
Performs the standard recording.
Performs the interval recording. (A function to repeatedly perform the operation of one frame recording in set time interval.)
Holds the settings.
Does not hold the settings. It will always be [NORMAL] the next time when the power is turned on.
[00]...[23]
[00]...[59]
[00]...[59]
[00] ... [23] (when [23.98p])
[00] ... [24] (when [50.00i], [50.00p], or [25.00p] is set)
[00] ... [29] (when [59.94i], [59.94p], or [29.97p] is set)
Advances regardless of the operation mode.
Advances only while recording.
Uses the drop frame mode.
Uses the non-drop frame mode.
Selects the image information (such as frame rate) of the camera.
Selects the user bits set in [UB PRESET].
– 96 –
Advertisement
Table of Contents
