No
Parts
6
Cushion Mid
1) As seen in the picture besides, pull out
2) Pull out the EPS structure through the
3) Assemble the product by adjusting it
Samsung Electronics
All manuals and user guides at all-guides.com
Procedure
the EPS structure located at the center of
exhaust air and supply air.
inspection hole.
with the direction, following the direction
carved on the surface of Cushion Mid. Put
the part written with "Down↓" downwards
and put the part with "Motor→" towards
the Motor when assembling the unit.
Make sure not to break down EPS
structure.
Remark
4-25