Connecting Monitor Speakers - Yamaha RemoteLive Disklavier DKC-850 Connection Manual

Connecting Monitor Speakers

To listen to the internal XG tone generator voices, you have to connect
monitor speakers. Connection methods vary depending on whether your
piano is equipped with the Silent Piano™ function or not.
■ For Pianos Equipped with the Silent Piano™
Function
Connect the AUX IN jacks of your piano to the OUTPUT jacks on the rear of
DKC-850 with the supplied audio cable.
For models with the control box
Connect with the supplied audio
cable (pin plugs – stereo mini plug).
To AUX IN jack
(stereo mini plug)
Audio cable
(supplied)
DKC-850
■ For Pianos Not Equipped with the Silent Piano™
Function
Connect the input jacks of monitor speakers to the OUTPUT jacks (pin
jacks) on the rear of DKC-850 with audio cables.
(Example: connecting the Yamaha MSP3 monitor speakers)
AC wall outlet
Monitor
speaker (left)
POWER
INPUT
ON
LINE 1
(--10dB)
OFF
LINE 2
(--4dB)
PARALLEL
Audio cable
(pin plug – pin plug)
(not supplied)
DKC-850
For models with the amplifier
Connect with the supplied audio
cables (pin plug – phone plug).
DKC-850
Monitor
speaker (right)
POWER
ON
OFF
POWER
INPUT
ON
LINE 1
(--10dB)
OFF
LINE 2
(--4dB)
PARALLEL
Audio cable
(pin plug – pin plug)
(not supplied)
To AUX IN jacks
(phone plug)
Audio cables
(supplied)
4
Note:
The shape of units or the location of
the AUX IN jacks varies depending
on the piano model.
Note:
Two audio cables (pin plug – phone
plug) are supplied to connect this unit
to the piano equipped with the Silent
Piano™ function. Prepare suitable
cables for connection of the monitor
speakers.