Page 1
使用說明書 (Household) Massage Lounger (家用)電動按摩椅 Model No. EP-MAK1 型號 English 繁體中文 Thank you for purchasing this Panasonic product. Before operating this unit, please read these instructions completely and save them for future use. 感謝您購買本 Panasonic 產品。 使用本產品之前, 請仔細閱讀本說明書, 並妥善保存以供未來使用。...
Page 2
Searching for FAQs has been made easier. EN 10 Transport, installation and assembly ● Dimensions of main unit! (EN49) EN 18 How to use the touch panel? ● About user selection / user registration (EN22) ● When you want a complete massage (EN23) ●...
Safety Precautions Always follow these instructions This section contains instructions that you must follow to prevent personal injury or damage to property. ■ The instructions are classified according to the level of injury or damage that may occur due to the mistaken use of this unit. Please ensure that you read all instructions before using the Household Massage Lounger.
Page 5
■ Instructions that you must follow are indicated using the following symbols. (The following symbols are examples.) Denotes a specific operating procedure that Denotes a specific operating procedure that must not be performed. must be performed. When in use When massaging the neck area, be careful ...
Page 6
Safety Precautions (continued) WARNING Symptoms Power plug, power cord etc Persons who are otherwise healthy but have any of Do not do anything that may damage the conditions listed below should consult with their the power cord or power plug. physicians before using the unit.
Page 7
CAUTION Power supply Before and during use To ensure safety, connect the unit to a Do not use the massage rollers on your head, properly grounded outlet. stomach or bare skin. Also, do not place your • Otherwise it may lead to accident or hands or feet between the massage rollers.
Part names and functions of main unit Upper arm massage section Retracted position of massage rollers ● Includes integrated air Controller (EN16 to EN17) massage function Pillow Controller stand Backrest ● Massage rollers ● "Heat" massage Controller cord ● Built in air bag for lower back massage Comfort cushion Seat...
Page 9
Back cover Controller holder Code clip Controller holder fixing screw (EN43) Caution tag Rating sticker Caster Caster base Caster Power cord Power plug Power switch section lock switch power Lock switch open Power switch lock Lock switch key Lock switch key tag ●...
Setting up the massage lounger 1) Checking the accessories ● ● ● Armrests (Left/Right) Pillow Comfort cushion Controller stand and controller holder are located on the right armrest. ● Power cord Left/Right indication (armrest back) 2) Where to use the unit Ensure there is adequate space to recline.
Page 11
● ● ● Allen key (1 pc.) Attachment screws Lock switch key (1 pc.) (M6 x 29), Silver (2 pcs) (Cross section) This is initially 4 mm inserted in the lock switch of the power switch section prior to leaving the factory. 4) Turn on the power and raise the backrest to the upright position ①...
Assembly Fasten the armrest <Attaching the right armrest> ① Insert the armrest into the unit. • "Right" and "Left" are indicated at the back of the armrest. • Insert the armrest from the top aligning the▲marksonthesideofthearmrest. • Be careful to avoid pinching your fingers and controller cord.
Page 13
Attaching the controller to the controller holder ① ② Put the controller cord Horizontally in the groove of the align the Protrusions controller holder. groove of the controller to the protrusions of the controller holder. Grooves Controller cord Groove ③ Push the controller.
Before starting massage Check the surrounding area Watch for people and walls in the surrounding area to Make sure there are no objects, persons, or pets in the vicinity of the unit. prevent hitting them when moving the controller ● The massage lounger may not work when pets such as dogs and stand to the outer side of cats chew on or trip over the controller cord.
Page 15
Insert the power supply plug, turn the lock key switch to "open", and power switch to "on". (EN11) Adjust the pillow position Remove the pillow and adjust the height of the pillow so that the bottom edge is at ear level. ●...
Part names and functions of the controller Controller Touch Panel (EN17) OFF/ON button ⁃ Starting massage operations • The power of the controller is turned on. • The power is automatically turned off when the massage operation is completed. ⁃ Suspending ongoing massage operations •...
Page 17
Screen displays during massaging operations ⁃ Press the displayed buttons to operate. ⁃ The power is turned OFF automatically if massage is not started and no operation is performed for about 3 minutes. <Viewing screens> The "Full body auto massage" course is used as an example for the screen displays shown below. Buttons and status displays vary, depending on the selected course.
Simple use User selection Menu Course & body part selection ⁃ Just select the course and let the machine do the massaging Select one course When you want a complete massage (EN23) Select the user ⁃ If the user is registered, the settings made will be stored in memory.
Page 19
Scanning of shoulder roller position Start the massage and adjust to suit your desire ⁃ See EN20 to EN21 for details. Operations can be adjusted (EN30 to EN34) arts Operations can be adjusted (EN30 to EN34) n be Sensing is not performed when any of the followings is selected. <When air course is selected>...
Scanning of shoulder roller position ⁃ Scanning of shoulder roller position is the operation of estimating the shoulder position in order to ensure that massaging is done matching with the body shape. (Height range of scanning of shoulder roller position is about 140 cm to 185 cm.) Scanning of shoulder roller position flow The unit body moves Select a course...
Page 21
Scanning of shoulder roller position Complete ⁃ When completed, the following Tapping action Massage roller screen is displayed, and the movements massaging is started. When adjusting the shoulder ⁃ While a beeping sound is position, tapping action is being made, the massage performed to make it easy to roller rises along the spine identify where the massage...
About user selection / user registration When you would like to store the settings made to suit your liking in memory ⁃ Perform user registration before using the lounge for massaging. Register as a user and store If user registration is made, the adjustments and settings to massaging are automatically the massage adjustments stored and updated in memory.
When you want a complete massage ⁃ The power is turned OFF automatically if massage is not started and no operation is performed for about 3 minutes. Select the user. Select "Full body Turn on the power. auto massage". (EN22) User display (The registered user is just an example) Select one...
When you want a massage of a particular body part with your favorite action ⁃ The power is turned OFF automatically if massage is not started and no operation is performed for about 3 minutes. ⁃ In "Select favorite area", it is possible to select the desired part and select the desired massaging operation. (See EN25 for details) ⁃...
Page 25
Would like to massage with operations to your liking ⁃ It is possible to switch OFF or ON the massaging operation for each body part, and to carry out only the desired massaging operation. (Edit program) ⁃ The operation is made after starting to massage. ⁃...
The contents of the action Massage operation by massage rollers ⁃ When "Full body auto massage" is selected, massaging operations that are suitable for the course are performed automatically. ⁃ When "Select favorite area" is selected, operations that can be displayed or turned on/off vary depending on the selected body parts.
Page 27
Stretching A stretching operation is that of stretching or twisting the body using the movements of air or massage rollers. Body parts for stretching Neck Core Chest Lower back Pelvis Description of stretch action "Neck" stretch "Pelvis" stretch Stretches the Stretches and twists the muscles of the neck.
Page 28
The contents of the action (continued) Hip massage During a hip massage, the seat air bag will lift up your hip and the massage rollers will go round your hip to massage. In addition, by supporting your lower back with the lower back air bag to raise your hip, the massage rollers will be able to reach the muscles of your hip more effectively.
Proper placement of hands, arms, legs and soles Hand & arm massage Insert hands and arms Place the shoulders and arms so deeply into the section. that they come into contact with the Upper Arm Massage Section. Align elbows with armrests. Leg &...
Adjusting the intensity ⁃ It is possible to adjust to your liking the adjustments and settings, etc., during massaging. ⁃ The overall operation time does not change even when adjustments are made with "Repeat", "Skip" or "Stretch" and the like during a massage operation. •...
Page 31
Settings & adjusting method ⁃ This may not be accepted if selected when an operation is switching to another operation. ⁃ Details can be checked on the touch panel while the motion is repeated. ⁃ The number of repetitions is the same whether pressed once or pressed twice or more times. ⁃...
Page 32
Adjusting the intensity (continued) Function name Description Turns OFF/ON operations for upper arm/arm, as well as thigh/leg and soles. The operating intensity can be adjusted in 3 stages. Press "Arm/Leg/Sole". Select a body part • When "Select favorite area" is selected, it is possible to add or cancel a body part from this screen.
Page 33
Settings & adjusting method ⁃ See EN26 for air action. Press "-" or "+". Press "Close". <Intensity of actions> Intensity of motions can be adjusted in 3 stages by pressing "-" or "+" for desired body parts. Intensity Medium High Upper arm/arm and thigh/leg and sole intensity display...
Page 34
Adjusting the intensity (continued) Details on available adjustments Details on available adjustments vary depending on the selected course. O: Adjustments available ―: Adjustments not available Full body auto massage Adjustment Select Recommended course Optional course function favorite area Swedish/Deep/Shiatsu Stretch Quick -...
About the settings and screen panel Settings screen Ⱚ Display brightness …… Setting the brightness of the touch panel Ⱚ Display auto off ……… Setting the time until the screen becomes dark • The screen is dimmed when operation is not performed for a set time. When the screen is touched, it returns to a brighter display.
After completing the massage Once the time is up After the timer has finished, ⁃ The legrest will lower so you can stand up safely. If you have extended the sole massage section slide, it may hit the floor and not stow completely. Raise your legs to retract all the way.
Moving the unit Lift and move the main unit Lift and move with one person holding the sides of the legrest Always carry the lounge with at least two people!! and one person holding the backrest cover groove. (EN10) Moving the unit on its casters ⁃...
Cleaning and maintenance Never use chemicals such as thinner, benzine, alcohol, etc. Notes on use ⁃ Be careful when using the unit with clothing such as jeans or colored clothes. (Cause of color transfer to the synthetic leather and fabric portions) ⁃...
Q&A Question Answer Before use Can I use the unit if I have an Consult your doctor before using this unit. illness that requires regular Massage is a form of stimulation by tactile pressure in which pressure is medical attention? applied to the muscles to relax them.
Page 40
Q&A (continued) Question Answer During operation During scanning of shoulder Massages stop for safety if the body cannot be detected for one of roller position or a massage, the following reasons. 7 short beeps sounded ( ⁃ The user is not sitting. ⁃...
Page 41
Question Answer During operation (continued) The angle of the backrest, legrest The angle automatically changes in the following cases. or armrest automatically changes ⁃ While scanning the shoulder roller position at times. The unit body moves automatically, and gets inclined to the angle that makes scanning easy.
Page 42
Q&A (continued) Question Answer How to adjust the <Intensity> The auto course is "not strong Try the following methods. enough even at the strongest ⁃ Maximum intensity is set for a course but the intensity is insufficient. setting..." or is "too strong even Leaning back the backrest results in more body weight pressing at the weakest setting...".
Page 43
… Actual movements or sensations may vary. The noise grows louder after This may be a malfunction. Contact the nearest Panasonic service using the chair for a long time. center for an inspection and repair.
Troubleshooting Investigate the "Problem" and apply the "Remedy" below. If the problem still exists after following the remedy, contact an Panasonic service center. Refer to EN51 for details when requesting repair. Problem Cause and Remedy The action stops mid-way. There was a power outage.
Page 45
The unit has been damaged. → To prevent accidents, be sure to contact an Panasonic service center. (EN51) The power cord or power plug is abnormally hot.
Error display <Example of error display> Error display Contents For safety reasons, action will terminate automatically when it cannot detect if someone is seated. If this error occurs even if you are seated, press , sit back all the way to the backrest, and operate from the start again. There is a malfunction inside the massage device.
Sound when the sole roller changes between "forward" and "reverse" "Grating", "Grinding" sounds Rubbing sound of the sole roller on fabric If these sounds have grown louder, there may be a malfunction. ⁃ Contact the nearest Panasonic service center for inspection and repair. EN47...
Specifications Power supply AC 220 V 50 Hz 135 W Power consumption (when the controller is "off", approx. 0.3 W) Heater unit power 23 W consumption Massage area Approx. 79 cm (The massage rollers move a total of approx. 63 cm) (Up-Down) Roller spacing during kneading operations (including roller widths) Massage area...
Page 49
Unit dimensions Front Max. width: Approx. 85 cm (Approx. 68 cm with the armrest detached) Armrest height: Approx. 81 cm Width of floor section: Approx. 64 cm Side Length: Approx. 130 cm Backrest height: Approx. 120 cm Extension length of Length of floor section: sole massage section: Approx.
Page 96
規格 AC 220 V 50 Hz 關於電源 135 W 消耗電量 (操作器「關閉」時約為0.3 W) 23 W 加熱器消耗電量 約 79 cm (按摩輪總共移動約63 cm) 按摩區域(上下) 揉捏操作期間的按摩輪間距(包括按摩輪寬度) 頸部、 肩部和背部 : 約5 cm 至 21 cm ; 腰部和臀部 : 約5 cm 至 25 cm 按摩區域(左右) 上 垂直移動和脊柱伸展的按摩輪間距(包括按摩輪寬度)...
Page 97
主機體尺寸 正面 最大寬度 : 約 85 cm (拆下扶手時約為68 cm) 扶手高度 : 約81 cm 底部寬度 : 約64 cm 長度 : 約130 cm 側面 靠背高度 : 約120 cm 腳掌按摩部分的延伸 接地部分長度 : 約79 cm 長度 : 約18 cm 規 格 高度 : 約79 cm 腳掌按摩部分移動...
Page 98
This product incorporates the following software: (1) the software developed independently by or for Panasonic Corporation, (2) the software owned by third party and licensed to Panasonic Corporation, (3) open source software licensed under terms and conditions. The software categorized as (3) is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.