ID Settings
HOME
→
ID Settings
→ ENTER E
ID Settings
- The displayed image may differ depending on the model.
Assign an ID to a set.
Device ID
Enter the ID number of the product connected to the input cable for input signal reception. (Range: 0~224)
― Press u/d to select a number, and press E.
― Enter the number you want using the number buttons on the remote control.
PC Connection Cable
Select a method to connect to MDC to receive the MDC signal.
RS232C cable
•
Communicate with MDC via the RS232C-stereo cable.
RJ-45 (LAN)/Wi-Fi Network
(DB10E-T) /
•
Communicate with MDC via the RJ45 cable.
RJ45(LAN) cable
(DB10E-POE/DB10E-TPOE)
76