Wall-Mounted Installation - Huawei SUN2000 Series User Manual

SUN2000-(196KTL-H0, 200KTL-H2, 215KTL-H0)
Series
User Manual
Figure 4-9 Installing the mounting bracket
----End

4.4.2 Wall-mounted Installation

Wall-mounted Installation
Step 1 Install the mounting bracket.
Avoid drilling holes in the water pipes and power cables buried in the wall.
● To prevent dust inhalation or contact with eyes, wear safety goggles and an
anti-dust respirator when drilling holes.
● Clean up any dust in and around the holes using a vacuum cleaner and
measure the distance between holes. If the holes are inaccurately positioned,
drill a new set of holes.
● Level the head of the expansion sleeve with the concrete wall after removing
the bolt, spring washer, and flat washer. Otherwise, the mounting bracket will
not be securely installed on the wall.
Issue 07 (2021-07-08)
NO TE
The M12x40 bolt assemblies are delivered with the SUN2000 (bound to the mounting
bracket). If the bolt assembly length does not meet the installation requirements, prepare
M12 bolt assemblies by yourself and use them together with the delivered M12 nuts.
WARNING
NO TICE
Copyright © Huawei Technologies Co., Ltd.
4 Installation
26