Installation Instructions; Unacceptable Installations; Packing List; Mounting - LG LGES-5048 User Manual

02

INSTALLATION INSTRUCTIONS

2.1 Unacceptable Installations

Please avoid the following installations， which will damage the system or the Inverter.
Back-Up Back-Up
On-Grid
Load
For general version, back-up cannot connect in parallel
For further advance application, please contact after-sales.
Smart Meter
05
One meter cannot be connected to multiple inverters, and
different CTs cannot connect to a same line cable.
Generator
Incompatible battery
Back-Up On-Grid
On-Grid or back-up side cannot be Inverter battery input cannot be
connected to any AC generator. connected to incompatible batteries.

2.2 Packing List

Upon receiving the hybrid inverter, please check if any of the components as shown below are
missing or broken.
Wall-Mounted
Inverter
Bracket
Battery Pin Hexagon Fixed
Terminal Terminal screw Screw
PV PV
One meter cannot be connected to multipe inverters. And
different CTs cannot be connected to the same line cable.
Battery
One battery bank cannot be connected to multiple
inverters.
Back-Up
Battery
Back-up side cannot be connected
to grid.
SMART METER or
Reset
Positive PV Plug
Smart Meter With CT
PE Expansion WiFi bluetooth
Terminal Bolts Module Module User Manual

2.3 Mounting

2.3.1 Select Mounting Location

For inverter's protection and convenient maintenance, mounting location for inverter should be
selected carefully based on the following rules:
Any part of this system shouldn't block the switch and breaker from disconnecting the inverter
from DC and AC power.
Rule 1. Inverter should be installed on a solid surface, where it is suitable for inverter's dimensions
and weight.
Rule 2. Inverter should be installed vertically or lie on a slope by a max of 15°.
Rule 3. Ambient temperature should be lower than 45°C.
(High ambient temperature will cause power de-rating of inverter.)
Rule 4. The inverter installation should be protected under shelter from direct sunlight or bad
weather like snow, rain, lightning etc.
On-Grid
Keep away from sunlight
Rule 5. Inverter should be installed at eye level for convenient maintenance.
Rule 6. Product label on inverter should be clearly visible after installation.
Rule 7. Leave enough space around the inverter according to the below figure.
200mm
Battery Cover
Inverter cannot be installed near flammable, explosive or strong electro-magnetic
equipment.
Quick Installation
Instructions
Keep dry Keep it clear of snow Sun
300mm
200mm 300mm
500mm
06
Rain Accmulated snow
Upward ---------- 300mm
Downward ------ 500mm
Front ------------- 300mm
Both sides ------- 200mm