Software Upgrade - Philips Freeman 7525 Service Manual

3. Software Upgrade

a) E2P upgradation using USB:-
Steps for E2P upgradation by USB (pen drive):
1. Copy the E2p_dump.bin file from computer to USB. Ensure the file is for the intended panel for
which you want program the board.
2. Keep the set in ON condition.
3. Plug in the USB in USB port of TV Set.
4.
Press ATV Menu key and press "1950" of Remote Control.
5. Then we will enter in factory MENU
6. Select setup & press the OK key of the Remote Control
.
8