Advertisement
Available languages
Available languages
30
www.husqvarna-electrolux.se
5. CONTROLS
The hood is fitted with a control panel with
aspiration speed selection control and a
light switch to control cooking area lights.
Use the high suction speed in cases
of concentrated kitchen vapours. It is
recommended that the cooker hood suction
Speed ON/OFF button
1
Control panel on/off key
2
Suction speed (power) key 1:
Suction speed (power) key 2:
3
4
Suction speed (power) key 3:
5
Suction speed (power) key 4:
Note: suction speed (power) key 4 has
a limited duration of 5 minutes, after
which the previous suction speed is
reactivated.
6
"Breeze" function key
(Room ventilation)
The hood switches on at low suction
speed (power) for 60 minutes, after
which it switches off.
7
Filter saturation control and
activation/deactivation key
8
Hob2
9
Lights ON/OFF key
T6 1
T2
2
T3
3
ood function indicator
H
is switched on for 5 minutes prior to cooking
and to leave in operation during cooking
and for another 15 minutes approximately
after terminating cooking.
The control switches are located on the
unit's front panel:
T4
4
T5
5
T6
6
Carbon filter saturation control activation/
deactivation function
With the hood in standby, press key 5 for
longer than 3 seconds
Key 7
saturation filter has been activated.
Key 7
the carbon saturation filter has been
deactivated.
Filter saturation control and reset
function
At regular intervals and depending on
the hood temperature, key
up to indicate that the filters need to
be maintained in accordance with the
instructions in the relative paragraphs.
Key
required on the grease filters
Key
required on the carbon filter.
Filter saturation indicator reset
With the hood in standby, press key
longer than 3 seconds.
Repeat the operation if necessary.
5.1 Hob
The hood is equipped with a function for
wireless connection with the cooktop for
automatic adjustment of the most suitable
speed. Refer to the instruction manual of
the cooktop to verify the presence and
compatibility of this function.
In the case of first connection to the mains
or abrupt disconnection from power supply
(blackout), wait 1 minute to allow the hood
to restore the connection with the cooktop.
When the hood is working in Hob
mode, key
T7
7
T8
8
will flash to indicate that the carbon
will remain lit to indicate that
7
on with a fixed light: maintenance is
7
on and flashing: maintenance is
ood
H
2
8
is lit.
T9
9
7
lights
7
for
ood
H
2
Advertisement
