Tv/Video; Watching Tv And Video - Sony LocationFree LF-X11 Operating Instructions Manual

TV/Video

Watching TV and
Video
Open the [Index] window and select TV, Video1
or 2, Monitor Video IN.
z
Tip
When you turn on the Monitor, the TV channel or
video that you were watching when you turned it off
appears.
Note
This Monitor does not support non-interlaced signals
used for computer monitors, etc.
Changing channels with the on-
screen remote control
Touch anywhere on the screen to display the on-
screen remote control, then select a channel.
You can also hide the on-screen remote control by
touching the screen.
On-screen remote control
Changing channels with the stylus
Slide the stylus over the screen from left to right to
display the next channel, and from right to left to
display the previous channel. Hold the stylus down
at the end of a stroke to cycle through the channels
in the direction indicated.
z
Tips
• If you are using the built-in tuner, you can change
channels in TV mode by skimming the screen.
• In video mode, skimming the screen changes
channels on the tuner of the connected video
equipment. This option is only available when the
connected other device has a tuner and remote
control settings have been configured (1 page 67).
• Changing channels is possible only when a TV
program is displayed on the entire screen. You
cannot do so while the on-screen remote control is
displayed.
To adjust the volume
Press the VOLUME +/– buttons on the top of the
Monitor.
z
Tip
Press the VOLUME – button on the Monitor for 2
seconds to silence the sound quickly.
31