ABB FlexPendant Product Manual page 20

2 Installation
2.1 Installing the bracket for standard robots
Continued
Dimensions, small version
Dimensions, large version
Installing the bracket
Use this procedure to install the bracket holding the FlexPendant Retractable Cable.
1
2
Limitation
Do not install the FlexPendant Retractable Cable when a robot system is equipped
with any of the following options:
20
Action
Make holes for the bracket screws.
Hold the FlexPendant Retractable Cable bracket
in place and secure it with the screws.
• 733-3 External panel
• 733-4 External panel small box
• 734-1 Panel cable - 15 m
• 734-3 Panel cable - 30 m
• 734-5 Panel cable - 7 m
© Copyright 2015-2016 ABB. All rights reserved.
Note
Center distance of the holes: 70
mm
Continue with connecting the
cables, see
on page 23.
Product manual - FlexPendant Retractable Cable
3HAC048816-001 Revision: B
Connecting the cables