Setting Wan Failover And Backup Routing - ABB ARR600 User Manual

Section 5
Network configuration
5.2.4
26
If necessary, change the SIM card's PIN code by using a mobile phone.
3. If automatic APN discovery does not work, define the APN settings.
3.1. Set APN Type to Manual.
3.2. Type the cellular access point name in the APN field according to the
network operator's instructions.
By default, the device uses automatic APN discovery with default APN
values based on the network ID received from the cellular network. When
APN Type is set to "Manual", the access point works as a gateway from the
cellular network to the Internet. There are public and private access points. A
public access point is usually defined. A private access point requires contract
with a cellular operator. The device is compatible with both public and
private access points.
4. If the cellular network's access point requires authentication, define the
authentication settings according to the network operator's instructions.
4.1. Set Authentication to PAP or CHAP.
4.2. Type the access point's username in the Username field.
4.3. Type the access point's password in the Password field.
5. If the device acts as a wireless router to Ethernet devices, and DNS is needed,
enter the DNS settings.
• Set DNS Selection to From Network to set up the device to receive
DNS server IP addresses automatically from the cellular network.
• Set DNS Selection to Manual to set up the device to use DNS servers
manually defined in the DNS Servers field.
6. Click Submit to save the settings.
7. Restart the device to activate the configuration.

Setting WAN failover and backup routing

1. In the left pane, click Network WAN Failover.
2. Set WAN Default Route to Yes.
This setting enables the use of the Ethernet WAN or the Mobile WAN as the
default route interface.
3. Set the value of Mobile WAN On Demand.
• If the backup WAN interface needs to come up only when the primary
interface goes down, select Yes.
• If both the wireless and Ethernet WAN interfaces have to be up all the
time, select No.
4. Click Submit to save the settings.
5. Restart the device.
1MRS758458 F
ARR600
User Manual