Bosch UniversalRake 900 Instructions Manual page 5

from the operator. Always ensure
that both hands are in the operating
position before returning the ma-
chine to the ground.
Do not put hands or feet near or un-
u
der rotating parts.
Always stand clear of the discharge
u
zone when operating the machine.
Never pick up or carry the machine
u
while the motor is running.
When storing, make sure that all 4
u
wheels of the garden tool stand on
the ground/floor.
Only lift the garden tool with the car-
u
rying handle. Use the carrying handle
with care.
Do not modify the machine. Unau-
u
thorized modifications can impair
the safety of your machine, lead to
increased noise and vibrations, and
poor performance.
Be careful during adjustment of the
u
product to prevent entrapment of
the feet and hands between moving
tines/blades and fixed parts of the
machine.
Avoid operating the product in bad
u
weather conditions especially when
there is a risk of lightning.
Regularly inspect the supply cable
u
and any extension cables. Do not
connect damaged cables to the sup-
ply or touch a damaged cable before
it is disconnected from the supply. A
damaged cable can lead to contact
with live parts. Beware electric
shock hazard.
Bosch Power Tools
Do not touch the tines before the
u
machine is disconnected from the
supply and the tines have come to a
complete stop.
Keep supply cables and extension
u
cables away from the tines. The
tines can cause damage to the cables
and lead to contact with live parts.
Beware electric shock hazard.
Remove the plug from the socket:
– Whenever you leave the machine.
– Before clearing a blockage.
– Before checking, cleaning or work-
ing on the machine.
– After striking a foreign object. In-
spect the machine for damage and
change the blade as necessary.
– If the machine starts to vibrate ab-
normally (check immediately).
Connecting to the mains
The voltage of the power source
u
must correspond with the data on
the type plate of the product.
We recommend that this product is
u
only connected into a socket which
is protected by a circuit-breaker that
would be actuated by a 30 mA resid-
ual current.
Only use or replace power supply
u
cables for this unit which correspond
to the types indicated by the manu-
facturer. See the operating instruc-
tions for the order no. and types.
Never touch the mains plug with wet
u
hands.
English | 5
F 016 L94 117 | (23.10.2020)