Pairing; What Is Pairing; Pairing Procedures - Sony XBA-BT75 Operating Instructions Manual

Pairing

What is pairing?

Bluetooth devices need to be "paired"
with each other beforehand.
Once Bluetooth devices are paired,
there is no need for pairing again,
except in the following cases:
 Pairing information is deleted after
repair, etc.
 When you attempt to pair with 9 or
more devices.
This unit can be paired with up to 8
devices; if a new device is paired
after 8 devices have been paired, the
device whose latest connection time
is the oldest among the 8 paired
devices is replaced by the new one.
 When recognition of the unit by the
device to be connected is deleted.
 This unit is initialized (page 31). All
pairing information is deleted.

Pairing procedures

Before pairing, charge the headset
(page 11, 13).
1
Place the Bluetooth device
within 1 m ( ft) of this unit.

While this unit is turned off,
press and hold the
function) button until the
indicator flashes blue and red
alternately.
The unit enters pairing mode. (It
takes about 7 seconds normally to
enter pairing mode. When pairing
for the first time, or the unit is
initialized, etc., pairing takes about
2 seconds.)
Note
If pairing is not established within about
5 minutes, pairing mode will be canceled
and this unit will turn off. In this case,
start over from step 1.
(Multi
1
Continued
US