Philips 8000 Series User Manual page 7

Note
For iOS version only
Wi-Fi network used by iPhone should be
switched temporarily to Play-Fi device AP
and restart Philips Sound APP to complete
the product's Wi-Fi setup. See the steps
below:
•
Go to Settings.
•
Select the Play-Fi
device in the Wi-Fi
set up
6
After successful Wi-Fi connection, the
Wi-Fi light indicator will stop pulsing
and turn solid. Once you set up this
product on your Wi-Fi network, you can
control it from any smartphone or tablet
on the same network.
7
After connection, you can change the
device name. There are several names
to choose from or create your own by
choosing Custom Name at the end of
the name list. Otherwise, it follows the
default name.
8
After connection, this product may
perform a software update.
Upgrade to the latest software when it is
your first time set up. The software upgrade
may take several minutes. Do not unplug
your speaker, turn off your device, or leave
the network during the update.
•
Select Wi-Fi setting.
•
Return to Philips
Sound App to
continue the set up.
Note
•
After connection, the product may perform
a software update. Upgrade is required after
initial set up. Without the upgrade, not all
product features can be available.
•
When the first time set up is not successful,
hold down the Wi-Fi button on the subwoofer
for 8 seconds until the second tone can be
heard and the Wi-Fi light is changed to a slow
pulse. Reset the Wi-Fi connection, restart the
app and start the set up again.
•
If you want to change from one network to
another, you need to set up the connection
again. Press hold down the
on the subwoofer for 8 seconds to reset the
Wi-Fi connection.
WPS mode
If your router has Wi-Fi Protected Setup
(WPS), you can set up the connection
without entering a password.
1
Press and hold the
4 seconds. You will hear a tone and the
Wi-Fi light will begin double blink.
2
Press the WPS button on your router.
The button is normally marked with this
WPS logo.
WPS
3
Follow the instruction in Philips Sound
App powered by DTS Play-Fi to start
the pairing.
Note
•
WPS is not a standard feature on all routers.
If your router does not have WPS then use
Standard Wi-Fi Setup.
•
Press the (Wi-Fi) button once if you want
to exit the WPS mode or it will automatically
exit after 2 minutes.
(Wi-Fi) button
(Wi-Fi) button for
7