Technical Data With Measured Variables And Measuring Conditions; Mechanical Characteristics - Bosch CR5CPCCF Installation And Manual

Document date:
Installation and Manual Documentation
CR5CPCCF
CC-DA/ESR1 18 Feb 2020
Figure: a) Requirements for parts outside radar cone to avoid multipath reflection
The same requirements are valid for a horizontal tilt of the fascia.

3. Technical data with measured variables and measuring conditions

3.1.

Mechanical characteristics

Gravel bombardment:
According to ISO 20567-1 against back housing (covered installation)
Mechanical shock:
According to DIN EN 60068-2-27
500m/s^2 / 6ms duration
Mechanical vibration (broadband random vibration):
According to DIN EN 60068-2-64
Frequency spectrum 5 Hz - 2000 Hz according to the following profile
Page: 22
© All rights reserved, Robert Bosch GmbH, also for the case of protected rights applications every power of disposal, like copy-right
and passing on rights, with us. The valid issue of this template is filed in CC-DA process landscape.