Panasonic NP-6F2MUQNZ Operating And Installation Instructions page 10

Using the Dishwasher
Operation
9. Delay wash start time.
10. Changing the
programme.
11. Adding dishware
during operation.
12. If the Dishwasher is
switched OFF during a
wash cycle.
Do not open the door when washing, because the hot water may splash out.
10
Function description
1. Press the Time Delay button to select the desired delay
time. Wash start time can be delayed from 1 hour to 24
hours.
2. Select desired programme by pressing the Programme
Selection button until the selected programme lights up.
3. Press the Pause/Start button to start the time delay
countdown. The washing programme will start
automatically after the countdown is ended.
1. A running cycle can only be modifi ed if it has been running
for a short time. Otherwise the detergent may have already
been released and the water already drained. If this is the
case, the detergent dispenser must be refi lled.
2. Press the Pause/Start button then press the Programme
Selection button for more than 3 seconds to cancel the
running programme.
3. Select a new programme.
4. Restart the Dishwasher by pressing the Pause/Start
button.
1. Press the Pause/Start button to stop the Dishwasher.
2. Open the door.
3. Add dishes in the Dishwasher.
4. Close the door, then press the Pause/Start button, the
Dishwasher will start running again after approximately
10 seconds.
1. Switch ON again and restart the washing by selecting the
desired programme.
2. The washing will start from the beginning.
3. Detergent and rinse aid have to be refi lled if it is already
drained out.
WARNING