Connecting Cables To A Power Cable Connector; Obtaining Tools, Cables, And A Power Cable Connector; Peeling Cables - Huawei OptiX RTN 950A Quick Installation Manual

Appendix

Connecting Cables to a Power Cable Connector

1

Obtaining Tools, Cables, and a Power Cable Connector

Ruler Diagonal pliers
(optional)
2

Peeling Cables

Use the 1:1 peeling indicator on
1
one side of the power cable
connector as the peeling length
reference.
Peeling length
reference plane
1:1 peeling indicator (12 mm)
4 Repeat steps 1-3 to peel a 0 V ground
cable.
12 mm
Cable core
Utility knife Phillips
screwdriver
(M3 screw)
Use a pair of diagonal pliers to trim off one end of
2
a -48 V power cable. Place the cable on the
peeling length reference plane, and use a utility
knife to make a mark on the cable according to
the 1:1 peeling indicator.
12 mm
1:1 peeling indicator (12 mm)
If a ruler is available, you can use the ruler to measure a 12 mm
peeling length after trimming off one end of a cable.
12 mm
Note
44
Power cable connector
One -48 V blue power cable
One 0 V black ground cable
Peel the cable using
3
the diagonal pliers.
12 mm
Cable core