Assigning A Static Ip Address - D-Link DWL-900AP+ User Manual

Networking Basics
Checking the IP Address in Windows XP/2000
Type ipconfig /renew at the prompt to get a new IP Address. Press Enter.
The new IP Address is shown below.
(Windows 98/ME users: go to Start > Run. Type winipcfg at the prompt.
The Windows IP Configuration menu will come up. Click Release, then
Renew to obtain a new IP Address.)

Assigning a Static IP Address

Note: Residential Gateways/Broadband Routers will automatically assign IP
Addresses to the computers on the network, using DHCP (Dynamic Host
Configuration Protocol) technology. If you are using a DHCP-capable
Gateway/Router you will not need to assign Static IP Addresses.
If you are not using a DHCP capable Gateway/Router, or you need to assign a
Static IP Address, please follow these instructions:
• Go to Start
• Double-click on
Control Panel