D-Link DWL-810 Quick Installation Manual page 2

Connecting the DWL-810 to your
Ethernet-enabled device
A. First, connect the power adapter to the receptor at the back panel of the
DWL-810 and then plug the other end of the power adapter to a wall outlet or
power strip. The Power LED will turn ON to indicate proper operation.
B. Insert one end of the Cross-Over Ethernet cable (included) to the Ethernet port
on the back panel of the DWL-810 and connect the other end to the Ethernet
port located on the device (e.g., a Set Top Box, Gaming Console, laptop or
desktop computer, or network printer.) The LED light will blink when there is
data tranfer through the wireless connection.
C. The antenna is used by the DWL-810 to connect to other 802.11b wireless devices.
A. Receptor for
Power Adapter
C. Antenna
Used to wirelessly
connect to 802.11b
networks.
B. LAN Port
This is the connection for
Ethernet cables to your
Ethernet-enabled device.