Fragmentation Threshold; Rts Threshold - D-Link DWL-520 Manual

Using the Configuration Utility (continued)
Ad-Hoc Channel:
All devices in the Ad-Hoc network
must be set to the same channel
Profile IP Settings:
You can Enable or Disable
the IP Settings portion of
your profile here. If you
select Disable you will need
to configure the IP Address
information each time you
connect to a network. If
you select Enable you
will maintain the same IP
Address information each
time you connect to a
network.
Power Mode:
Launch Utility on Startup:
Disable -this default setting consumes the most power
Enable - this setting consumes the least power
Select Enable or Disable
Data Packet Parameter:
Set the Fragmentation Threshold and the RTS Threshold. Please see below.

Fragmentation Threshold:

This value should remain at its default setting of 2432. If you experience a high
packet error rate, you may slightly increase your Fragmentation Threshold within the
value range of 256 to 2432. Setting the Fragmentation Threshold too low may result
in poor performance.

RTS Threshold:

This value should remain at its default setting of 2432. If inconsistent data flow is a
problem, only a minor modification should be made.
Click Apply if you have made any changes
Advanced
14