Table of Contents
Advertisement
Section - Configuration
• Add DVX gateway – Add the DVX gateway as shown below and assign it to the 'LocalRouteGroup'. The 'SIP
user ID', 'Username' and 'Password' used in the Registration parameters can be chosen arbitrarily. The only
restriction is that they should be the same on both DVXs that are being stacked.
• Add Routes
• Go to Call Server > Routes
• Click on
icon for LocalRouteGroup and add the following routes
• Route from local user of DVX1 to local user of DVX2
D-Link DVX-1000 User Manual
Advertisement
Table of Contents
