D-Link DP-G310 User Manual page 32

Print Server Administration User's Guide
How many data bits are sent per byte
How many stop bits are sent with each byte
Whether or not a parity bit is sent, and if so what kind
(even or odd parity)
Whether or not software flow control is used
(XON/XOFF)
Whether or not hardware flow control should be used, and
if so what kind (DTR, RTS, or DTR/RTS).
To set the parameters for a printer port,
1. Select the print server in the PS Admin main window's
server name display (or extended server display).
2. Choose Server Device... from the Configuration menu, or
press the Configure Server button in the toolbar. (If you
have assigned a password to the server, you will have to
enter it at this point.) PS Admin will display the Server
Device Configuration window.
3. Press the button corresponding to the port you wish to
change. For parallel ports, the following dialog will be
displayed:
The fields that can be changed are:
26
Getting Started Setting up Your Print Server