D-Link DCF-560M User Manual page 20

7. In the Add RAS Device, select your modem.
8. Click OK", then leave the Remote Access
"
Setup dialog box open.
9. In the Remote Access Setup, select your
modem.
10. Click Configure", select Receive calls
"
only, and then click OK.
11. In the Remote Access Setup dialog box,
click Network".
"
12. In the Network Configuration dialog box,
clear Require data encryption.
13. Under Server Settings, select TCP/IP, and
then click Configure".
"
14. Select This computer only and select Use
static address pool.
— 20 —