Advertisement
DSM-120 Install Guide
Network Connection
• Wireless Connection
If you are connecting
wireless using the built-in
antenna, then you do not
need to connect the supplied
Ethernet cable.
For an optimal wireless
c o n n e c t i o n , p l a c e t h e
antenna at a 90
shown in the image to the
right.
• RJ-45 Ethernet Connector
If you are connecting wired,
insert the supplied Ethernet
cable into the Ethernet network
cable connector. Attach the
other end to a router or hub
on your network.
Note: You may have an Ethernet cable plugged into the unit and also connect
wirelessly. Neither will interfere with the other, but only one network can be accessed
at a time (wired or wireless). The network connection type is selected in the Setup
Wizard and can also be changed by going to the Setup Menu. To access the Setup
Menu, select SETUP on the menu and press Enter on the remote control.
D-Link Systems, Inc.
angle as
o
Connecting the DSM-120
13
Advertisement
