D-Link DSL-G604T User Manual page 34

connection. If you have been given specific settings for this to configure, type in the correct values
assigned by your ISP.
3. Choose the Connection Type from the pull-down menu. This defines both the connection protocol and
encapsulation method used for your ADSL service. The available options are PPPoA VC-MUX, PPPoA
LLC and PPPoE LLC. If have not been provided specific information for the Connection Type setting,
leave the default setting.
4. Click Next to proceed to next page.
Connection Type: Bridge Mode
1. In Bridge mode, the next page will prompt you to enter the VPI / VCI / Connection Type. Do not
change the VPI or VCI value unless you have been told to do so. These numbers are used to define a
unique path for your connection. If you have been given specific settings for this to configure, type in
the correct values assigned by your ISP.
2. For bridge mode Connection Type, the available encapsulation methods are 1483 Bridged IP LLC and
1483 Bridged IP VC-Mux. If you are unsure of the connection type, please ask your service provider.
3. Click Next to proceed to next page.
Note
Finally you can confirm that the setup process is completed. If you are satisfied that you have entered all the
necessary information correctly, click the Restart button to save the new configuration settings and restart the
Router. If you need to change settings from a previous menu, click the Back button.
If your service provider has instructed you to change the VPI or VCI
value for your ADSL connection, use the WAN menu to change these.