LG LX-D2960 Owner's Manual page 12

Before Operation
Timer Function
With the TIMER function you can have the radio recep-
tion, CD play, USB (LX-D2960A model) play and TAPE
play turned on and off at the time desired.
Press CLOCK to check the current time.
1 1
For your reference
If you don't set clock, timer function doesn't work.
Press TIMER to enter the timer setting mode.
2 2
"TUNERtDVD/CD tUSB (LX-D2960A model)
tTAPE" flash in the display window in turn.
For your reference
If you want to correct the previous memorized TIMER
setting, press and hold the TIMER button more than 2
seconds.
- The previous memorized timer setting for on Time and
" " indicator appears in the display window.
Press SET/CD [[ when the desired function flash-
3 3
es.
1. a. When you select TUNER function,
4 4
'PLAY' and 'REC' indicator flash in
the display window alternately for
about 3 seconds.
'PLAY' indicator : TUNER play only
'REC' indicator : TUNER play and recording
b.Press SET/CD [[ when the desired
function flashes.
c.Select the previous memorized preset
number by pressing . . />
front panel and press SET.
'ON TIME' indicator appears for about 0.5
seconds in the display window and then
disappears.
2. When you select DVD/CD, USB (LX-D2960A
model) or TAPE function,
'ON TIME' indicator appears for about 0.5
seconds in the display window and then
disappears.
Set the hour to switch on by pressing
5 5
. . /> > on the front panel.
Press SET/CD [[ to confirm the turn on hour
6 6
time.
12
7 7
8 8
9 9
1 1 0 0
1 1 1 1
1 1 2 2
1 1 3 3
1 1 4 4
1 1 5 5
To cancel or check the timer
Each time the TIMER button is pressed you can select
> on the
the timer set or cancel. You can also check the timer
setting status.
To activate or check the timer, press the TIMER
button repeatedly so that " " appears in the display win-
dow.
To cancel the TIMER, press the TIMER button
repeatedly so that " " disappears from the display
window.
• If you insert the DVD,VCD or DivX except audio
CD/MP3/WMA on the unit, the timer function will be
operated to the TUNER.
• This is not supported in the multi card reader.
Set the minute to switch on by pressing
. /> . > on the front panel.
Press SET/CD [[ to confirm the turn on minutes
time.
'OFF TIME' indicator appears for about 0.5
seconds in the display window and then
disappears.
Set the hour to switch off by pressing
. . /> > on the front panel.
Press SET/CD [[ .
Set the minute to switch off by pressing
. /> . > on the front panel.
Press SET/CD [[ .
Adjust the volume level by pressing
. /> . > on the front panel.
Press SET/CD [[ .
" " appears in the display window and the timer
setting has been completed.
Turn the system off.
The selected timer functions are automatically
switched on and off at the preset times.
otes