Table of Contents
Advertisement
Additional programme settings
en
Memory programme
â
You can save a selected programme
with your favourite settings here.
To store:
Switch on the appliance.
1.
Select a programme.
2.
Change the settings and/or select
3.
additional settings.
Press and hold â on the control
4.
panel for approx. three seconds.
The programme is saved if all of the
settings flash briefly.
To use the saved programme, touch â
briefly after you switch on the appliance.
To change the saved programme, press
and hold â again for approx. three
seconds after selecting the new
settings.
30
\
Additional programme
settings
You can find an overview of all of the
A d d i t i o n a l p r o g r a m m e s e t t i n g s
additional settings that can be selected
depending on the programme on the
printed supplement to the installation
and operating instructions.
ActiveOxygen
The laundry is additionally treated with
active oxygen before the wash cycle
and before the final rinse cycle in order
to thoroughly remove germs and
bacteria.
SpeedPerfect
Speed
Washing in a shorter time while
achieving a washing result that is
consistent with, but uses more energy
than, the selected programme, without
the SpeedPerfect setting.
Do not exceed the maximum
Note:
load.
EcoPerfect
Eco
Energy-optimised washing by reducing
the temperature while achieving a
washing result that is consistent with the
selected programme, without the
EcoPerfect setting.
Advertisement
Table of Contents
