D-Link DGS-1510-10L/ME Hardware Installation Manual page 48

DGS-1510/ME Series Metro Ethernet Switch Hardware Installation Guide
Feature Description
a short while other ports remain active.
•
For 802.3af/at capable devices it will provide the power for the
following classifications below.
Class Usage
0 Default
1 Optional
2 Optional
3 Optional
4 Reserved
•
Follow the PSE pinout standard. For an alternative solution, send
the power over pins 1, 2, 3 and 6 of 8 wires of UTP cables.
•
For IEEE 802.3af, use category 5e or higher UTP/STP cables.
Category 3 cables can be used if less power is required.
•
For IEEE 802.3at, use category 5e or higher UTP/STP cables
•
Both DGS-1510-28LP/ME and DGS-1510-28XMP/ME work with
all D-Link 802.3af and 802.3at capable devices and with all non-
802.3af and non-802.3at capable D-Link Access Points, IP
Cameras and IP Phones.
•
The total power budget is 193 Watts for DGS-1510-28LP/ME.
•
The total power budget is 370 Watts for DGS-1510-28XMP/ME.
43
Max Power used by PD
0.44 Watts to 12.95 Watts
0.44 Watts to 3.84 Watts
3.84 Watts to 6.49 Watts
6.49 Watts to 12.95 Watts
12.95 Watts to 25.5 Watts