Power Connector And Cable - HP ProBook 450 G5 Maintenance And Service Manual

Power connector and cable

Description
Power connector and cable
Before removing the power cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Service door
b. Hard drive
c. Keyboard
d. Top cover
e. Card reader board
f. Battery
g. Display assembly right hinge
non-touch on page
Remove the power cable:
1. Disconnect the cable from the system board (1).
2. Remove the power cable from the computer (2).
Reverse this procedure to install the power cable.
(Service doors on page
(Hard drive on page 43)
(Keyboard on page 46)
(Top cover on page 50)
(Card reader board on page
(Battery on page 65)
(Display assembly – non-touch on page 74
74)
35).
64)
Component replacement procedures
Spare part number
L01952-001
or Display assembly –
81